Density Functional Theory Method Research Articles

Big data benchmarking: how do DFT methods across the rungs of Jacob's ladder perform for a dataset of 122k CCSD(T) total atomization energies?

Total atomization energies (TAEs) are a central quantity in density functional theory (DFT) benchmark studies. However, so far TAE databases obtained from experiment or high-level ab initio wavefunction theory included up to hundreds of TAEs. Here, we use the GDB-9 database of 133k CCSD(T) TAEs generated by Curtiss and co-workers [B. Narayanan, P. C. Redfern, R. S. Assary and L. A. Curtiss, Chem. Sci., 2019, 10, 7449] to evaluate the performance of 14 representative DFT methods across the rungs of Jacob's ladder (namely, PBE, BLYP, B97-D, M06-L, τ-HCTH, PBE0, B3LYP, B3PW91, ωB97X-D, τ-HCTHh, PW6B95, M06, M06-2X, and MN15). We first use the A25[PBE] diagnostic for nondynamical correlation to eliminate systems that potentially include significant multireference effects, for which the CCSD(T) TAEs might not be sufficiently reliable. The resulting database (denoted by GDB9-nonMR) includes 122k species. Of the considered functionals, B3LYP attains the best performance relative to the G4(MP2) reference TAEs, with a mean absolute deviation (MAD) of 4.09 kcal mol-1. This first-generation hybrid functional, in which the three mixing coefficients were fitted against a small set of TAEs, is one of the few functionals that are not systematically biased towards overestimating the G4(MP2) TAEs, as demonstrated by a mean-signed deviation (MSD) of 0.45 kcal mol-1. The relatively good performance of B3LYP is followed by the heavily parameterized M06-L meta-GGA functional, which attains a MAD of 6.24 kcal mol-1. The PW6B95, M06, M06-2X, and MN15 functionals tend to systematically overestimate the G4(MP2) TAEs and attain MADs ranging between 18.69 (M06) and 28.54 (MN15) kcal mol-1. However, PW6B95 and M06-2X exhibit particularly narrow error distributions. Thus, scaling their TAEs by an empirical scaling factor reduces their MADs to merely 3.38 (PW6B95) and 2.85 (M06-2X) kcal mol-1. Empirical dispersion corrections (e.g., D3 and D4) are attractive, and therefore, their inclusion worsens the performance of methods that systematically overestimate the TAEs.

Effects and molecular mechanisms of jet ablation and fuel corrosion on separation failure of the asphalt-aggregate interface in airport asphalt pavements

To guide the improvement of asphalt pavement durability in airports, the effects and molecular mechanisms of jet ablation and fuel corrosion on separation failure of the asphalt-aggregate interface were investigated in this study using molecular dynamics simulations and density functional theory method. Firstly, tensile separation behaviors of the virgin, aged, and fuel-corroded asphalt-aggregate interfaces were simulated under different loading rates to evaluate their tensile strength and fatigue cracking resistance, and the experimental data were also used to verify the reliability of the simulation results. Subsequently, the molecular mechanisms of jet ablation and fuel corrosion on the separation failure of the asphalt-aggregate interface were analyzed by calculating the work of adhesion, work of cohesion, flowability parameters, and intermolecular binding energy. The results show that the aged specimen has higher ultimate tensile strength and fracture energy, but its flexibility and fatigue cracking resistance are significantly reduced. This is because the polar oxygen-containing groups generated during high-temperature aging enhance the intermolecular binding energy of the asphalt, but this also restricts the diffusion of asphalt molecules, resulting in greater frictional resistance and viscosity of asphalt during shear deformation, and thus loss of mobility and self-healing properties. On the contrary, since the light and medium oils soften and dilute the asphalt, and also weaken the intermolecular binding energy of asphalt, the fuel corrosion reduces the ultimate tensile strength and fracture energy of the asphalt-aggregate interface system, resulting in insufficient overall strength and load-bearing capacity.

Computational Evaluation of the Structural, Topological, and Solvent Effects on the Nonlinear Optical Properties of 1-Methylurea Butanedioic Acid Crystal

In silico investigation of the effects of a molecule’s framework and surroundings on its nonlinear optical (NLO) response is still an active topic of study in the fields of photonics and optoelectronics. NLO materials play a crucial role in modern photonics and optoelectronic technologies. Presented here is a comprehensive theoretical analysis of the structural, topological, and NLO features of 1-methylurea butanedioic acid (MUBA) alongside solvent effects (water, DMSO, and benzene) using the DFT method at the B3LYP(D4)/6–311++G(d,p) level. Geometric and infrared parameters were calculated and compared with experimental values. The analysis using atoms in molecules (AIM) and the independent gradient model (IGM) reveals the presence of two noncovalent intermolecular interactions: N4–H16⋯O12 and O6–H25⋯O3, which stabilize the crystal structure. The natural bond orbital (NBO) analysis reveals that the LP(1)N4 ⟶ π∗(C2-O3) interaction is the most stabilizing and is enhanced in solvent environments. NLO data show that the first (βtot) and second (γ) hyperpolarizability values of MUBA are approximately 0.6–1.1 and 8.3–17.0 times higher than those of urea. In addition, the quadratic and cubic responses of MUBA are significantly reduced and increased, respectively, in solvent environments. Based on its NLO susceptibilities, MUBA exhibits SHG, EOPE, OKE, and EFISHG properties, suggesting its potential application in the production of optoelectronic devices and optical limiting. This study enhances our understanding of the factors influencing the NLO behaviour of organic crystals, providing valuable insights for designing materials with enhanced NLO characteristics. The implications extend to industries such as telecommunications and computing, where faster data transmission rates are in high demand.

Density functional theory study on the mechanism of water gas shift reaction catalyzed by molybdenum hexacarbonyl in aqueous solvent

The mechanism of the water gas shift reaction (WGSR) catalyzed by Mo(CO)6 in both gaseous and aqueous phases were analyzed using the density functional theory (DFT) method. This study indicates that aqueous phase slightly increased every energy barrier for each step along the reaction path. The turnover frequency (TOF) of the reaction was determined using the energy span model (ESM). The TOF value in the aqueous phase (2.48 × 10−16 s−1) is slightly lower than in the gas phase (6.08 × 10−16 s−1). Actually, the advantages of aqueous phase may be attributed to high solubility and concentration of H2O, CO, OH−. The study of temperature (300–900 K) on energy profile shows that the reaction rate of WGSR can be increased with the increase of temperature. This research filled the gap in understanding the mechanism for the WGSR in aqueous phase, provides a reasonable theoretical foundation for molybdenum-based catalysts development.

Understanding the Interface Enhancement Mechanisms of CFRP with the Polydopamine-Polyetheramine Interphase at the Molecular Level.

In this work, polydopamine (PDA) and polyetheramine D230 were selected to construct the PDA-D230 interphase between the carbon fiber (CF) and epoxy matrix. Density functional theory (DFT) and molecular dynamics (MD) simulations were performed to explore the interface enhancement mechanisms of a carbon fiber reinforced polymer (CFRP) with the PDA-D230 interphase from the molecular level. The adsorption characteristics of a PDA molecule on the CF surface were investigated using the DFT method. The results show that stronger π-π stacking interactions are formed due to the structure and orientation preference of the PDA molecule. The interfacial structures and properties of CFRP with the PDA-D230 interphase are derived from MD simulations. The PDA-D230 interphase on the CF surface induces stronger interfacial interaction energy, leading to the better load transfer between the CF and epoxy matrix. The existence of the PDA-D230 interphase on the CF surface can decrease the mean-square displacement (MSD) value and the free volume fraction of CFRP, which restricts the movement of epoxy atoms and inhibits the translational and rotational motion of epoxy chains. Compared with the epoxy using pristine CFs as reinforcement, the interfacial shear stress (ISS) of CFRP with the PDA-D230 interphase is improved by 13.1%. Our results provide valuable insights into the interface characteristics of CFRP with the PDA-D230 interphase, which are of great significance for exploring the strengthening mechanisms for CFRPs with the PDA-D230 interphase.

Quantum computational, charge density, optical, molecular reactivity and thermodynamical analysis of Di-Halogen substituted nicotinic acid derivatives

6-Chloro-3-fluoro-2-(trifluoromethyl) isonicotinic acid (6C3F2TINA) and 6-Chloro-5-fluoronicotinic acid (6C5FNA) are currently being studied using the DFT method for the detailed examination of structural and molecular character alterationsin gas as well as in several organic solvent media. Implementing electrostatic potential maps and Fukui functions analyses the reactive environment of compounds. The occurrence of the transfer of electrons and holes within the molecule is reported by a charge transfer study along with the heat maps. The orbital study investigates the electronic density and interactions within themolecules. Optical examination of compounds revealed an enhancement with the solvents. Thebonding typefound in molecules isdetermined by topographical investigation, which examines the concentration and localisationof electrons present in them. The UV–Vis spectra exhibit the absorption characteristics of these compounds. The thermodynamic investigation reveals the compound’s stability at various temperatures at 1 atm pressure.

Novel Prediction Using TB-mBJ of Electronic Properties, Magnetic Exchange Couplings, and Half-Metallicity in CrCaSe Materials

In this study, we have performed investigations on the structural stability, elec-tronic band structures, magnetic exchange couplings, and half-metallic performance of CrxCa1-xSe materials using computational methods of density functional theory via GGA-WC, GGA-PBE and, TB-mBJ exchange-correlation potentials. The CrxCa1–xSe compounds are thermodynamically stable and synthesizable owing to their negative formation energies. The structural parameters of CrxCa1–xSe with GGA-WC and GGA-PBE approximations appear to be in excellent concordance compared to the experi-mental data and recent theoretical calculations. According to GGA-PBE and TB-mBJ calculations, the CrxCa1–xSe compounds revealed integral magnetic moments and a half-metallic behavior with better half-metallic gaps, and spin-polarization of 100%. The CrxCa1–xSe alloys appear to be better materials for use in spintronic devices.

Visible-light-induced cascade radical cyclization for the synthesis of amide-functionalized fused quinazolinones

A light-induced non-activated olefin cascade radical addition/cyclization reaction was proposed, leading to the successful synthesis of 39 quinazolinone derivatives containing amide moieties, with yields up to 88 %. The reaction mechanism was studied by radical strapping test and DFT methods, verifying an oxidative-triggered cascade process promoted by the acylamino radicals. This strategy features mild conditions and broad substrate compatibility, providing a high atom-economical synthesis method for diverse quinazolinone.

Significance of Zn2+ in RyR1 for Structural Integrity and Ligand Binding: Insight from Molecular Dynamics.

Ryanodine receptor type 1 (RyR1) is a Ca2+-release channel central to skeletal muscle excitation-contraction (EC) coupling. RyR1's cryo-EM structures reveal a zinc-finger motif positioned within the cytoplasmic C-terminal domain (CTD). Yet, owing to limitations in cryo-EM resolution, RyR1 structures lack precision in detailing the metal coordination structure, prompting the need for an accurate model. In this study, we employed molecular dynamics (MD) simulations and the density functional theory (DFT) method to refine the binding characteristics of Zn2+ in the zinc-finger site of the RyR1 channel. Our findings also highlight substantial conformational changes in simulations conducted in the absence of Zn2+. Notably, we observed a loss of contact at the interface between protein domains proximal to the zinc-finger site, indicating a crucial role of Zn2+ in maintaining structural integrity and interdomain interactions within RyR1. Furthermore, this study provides valuable insights into the modulation of ATP, Ca2+, and caffeine binding, shedding light on the intricate relationship between Zn2+ coordination and the dynamic behavior of RyR1. Our integrative approach combining MD simulations and DFT calculations enhances our understanding of the molecular mechanisms governing ligand binding in RyR1.

Decarboxylation Mechanism of iso-Orotate Decarboxylase Revisited.

iso-Orotate decarboxylase (IDCase), which is involved in the thymidine salvage pathway, has attracted considerable interest owing to its chemical similarity to a hypothetical DNA decarboxylase in mammals. Although valuable insights into the active DNA demethylation of 5-methyl-cytosine can be obtained from the decarboxylation mechanism of 5-carboxyl-uracil (5caU) catalyzed by IDCase, this mechanism remains under debate. In this study, the catalytic mechanism of 5caU decarboxylation by IDCase was studied using hybrid quantum mechanics/molecular mechanics (QM/MM) methodologies and density functional theory (DFT) calculations with a truncated model. The calculations supported a mechanism involving three sequential stages: activation of the 5caU substrate via proton transfer from an arginine (R262') to the carboxyl group of 5caU, formation of a tetrahedral intermediate, and decarboxylation of the tetrahedral intermediate to generate uracil as the product. The reaction pathways and structures obtained using the QM/MM and DFT methods coincided with each other. These simulations provided detailed insights into the unique mechanism of IDCase, clarifying various unresolved issues, such as the critical role of R262'. In addition, aspartate D323 was found to act as a general base in the tetrahedral intermediate formation step and a general acid in the later C-C bond cleavage step.

Experimental and computational study on antioxidant activity and molecular properties of novel ferrocenyl Schiff bases

In this study, antioxidant and molecular properties of some important novel ferrocenyl Schiff bases were studied. The 4-Ferrocenyl aniline synthetic pathway was chosen as the general procedure for the synthesis of Schiff bases. Two experimental techniques, UV–Visible spectroscopy and cyclic voltammetry, and one theoretical DFT method was employed to find out their antioxidant activity and molecular properties of some novel ferrocenyl Schiff bases and compared it with standard antioxidant (Ascorbic acid). Maximum wavelength, extinction coefficient, IC30 and IC50 were estimated by using UV–Visible spectroscopy. For theoretical investigations, computational Amsterdam density function software was employed to study the molecular properties and reaction parameters based on density functional theory calculations. The cyclic voltammetry (CV) measurements in electrochemical experiments were done at room temperature while diffusion coefficient was estimated by using CV graphs. UV–Vis spectra of these compounds exhibited similar peaks with greater intensity ranges from 312 nm to 314 nm and smaller intensity ranges 471 nm to 473 nm which occurred because of the only substituent R (naphthoxy, phenoxy and phenoxy) in these compounds. Registered Amsterdam density function was utilized to determine the optimized structure, FTIR spectra, UV–Visible spectra, HOMO, LUMO, dipole moment, ionization potential, electron affinity, band gap, hardness, chemical potential and electrophility index. The overall electrode processes were found to be diffusion controlled and the novel compounds showed appreciable antioxidant activities.

Electronic structure and optical spectral analysis of the MnO42− anion with consideration of site and Jahn–Teller distortion

The ground state of 3d1 MnO42− was studied by density functional theory (DFT) and complete active space self-consistent field (CASSCF) methods in terms of a variety of molecular point group structures to ascertain the site and Jahn–Teller (JT) distortion effect. Modeling results from UB3LYP/6-31+G(d) calculations with natural bond orbital analysis show the four Mn–O bonds are coordinate covalent. The one-electron matrix elements from CASSCF(AILFT) (ab initio ligand field theory) with a second order perturbation treatment were used to calculate the parameters of the angular overlap model. These allowed the calculation of JT stabilization energies and first and second order JT coupling constants for MnO42− with C2v and D2d symmetry. Absorption spectra and excited state transition energies were calculated assuming the lattice distorted geometry was C2v with time-dependent DFT (TDDFT) using the unrestricted coulomb-attenuating UCAM-B3LYP density functional and with the spin-adapted spin-flip DFT using the UBH&HLYP density functional, both with the AUG-CC-PVTZ basis set. The mean absolute deviation of the calculations from experimental excited states for the ligand field and ligand-to-metal charge transfer (LMCT) bands was better than 0.1 eV. Several new assignments for LMCT excited states were made on the basis of the TDDFT excitation results.

Characterization of carbon dioxide on Ganymede and Europa supported by experiments: Effects of temperature, porosity, and mixing with water

The surfaces of icy moons are primarily composed of water ice that can be mixed with other compounds, such as carbon dioxide. The carbon dioxide (CO$_2)$ stretching fundamental band observed on Europa and Ganymede appears to be a combination of several bands that are shifting location from one moon to another. We investigate the cause of the observed shift in the CO$_2$ stretching absorption band experimentally. We also explore the spectral behaviour of CO$_2$ ice by varying the temperature and concentration. We analyzed pure CO$_2$ ice and ice mixtures deposited at 10 K under ultra-high vacuum conditions using Fourier-transform infrared (FTIR) spectroscopy and temperature programmed desorption (TPD) experiments. Laboratory ice spectra were compared to JWST observation of Europa's and Ganymede's leading hemispheres. The simulated IR spectra were calculated using density functional theory (DFT) methods, exploring the effect of porosity in CO$_2$ ice. Pure CO$_2$ and CO$_2$-water ice show distinct spectral changes and desorption behaviours at different temperatures, revealing intricate CO$_2$ and H$_2$O interactions. The number of discernible peaks increases from two in pure CO$_2$ to three in CO$_2$-water mixtures. The different CO$_2$ bands were assigned to $ nu $ (2351 cm$^ $, 4.25 mu m) caused by CO$_2$ dangling bonds (CO$_2$ found in pores or cracks) and $ nu $ (2345 cm$^ $, 4.26 mu m) due to CO$_2$ segregated in water ice, whereas $ nu $ (2341 cm$^ $, 4.27 mu m) is due to CO$_2$ molecules embedded in water ice. The JWST NIRSpec CO$_2$ spectra for Ganymede and for Europa can be fitted with two Gaussians attributed to $ nu $ and $ nu $. For Europa, $ nu $ is located at lower wavelengths due to a lower temperature. The Ganymede data reveal latitudinal variations in CO$_2$ bands, with $ nu $ dominating in the pole and $ nu $ prevalent in other regions. This shows that CO$_2$ is embedded in water ice at the poles and it is present in pores or cracks in other regions. Ganymede longitudinal spectra reveal an increase of the CO$_2$ $ nu $ band throughout the day, possibly due to ice cracks or pores caused by large temperature fluctuations.

Anion Structure Regulation of Cobalt Silicate Hydroxide Endowing Boosted Oxygen Evolution Reaction.

Transition metal silicates (TMSs) are attempted for the electrocatalyst of oxygen evolution reaction (OER) due to their special layered structure in recent years. However, defects such as low theoretical activity and conductivity limit their application. Researchers always prefer to composite TMSs with other functional materials to make up for their deficiency, but rarely focus on the effect of intrinsic structure adjustment on their catalytic activity, especially anion structure regulation. Herein, applying the method of interference hydrolysis and vacancy reserve, new silicate vacancies (anionic regulation) are introduced in cobalt silicate hydroxide (CoSi), named SV-CoSi, to enlarge the number and enhance the activity of catalytic sites. The overpotential of SV-CoSi declines to 301mV at 10mA cm-2 compared to 438mV of CoSi. Source of such improvement is verified to be not only the increase of active sites, but also the positive effect on the intrinsic activity due to the enhancement of cobalt-oxygen covalence with the variation of anion structure by density functional theory (DFT) method. This work demonstrates that the feasible intrinsic anion structure regulation can improve OER performance of TMSs and provides an effective idea for the development of non-noble metal catalyst for OER.

Synthesis of phosphonic acid and amide functionalized core–shell magnetic composite and its mechanisms for synergistic adsorption of thorium from strongly acidic solution

To develop adsorbents for the preeminent extraction of thorium in strongly acidic solutions is very imperative, due to strong inorganic acids are frequently used in the fuel cycle of thorium. Herein, a robust core–shell magnetic nanocomposite Fe3O4@SiO2/P (MBA-VPA-AM) possessing phosphonic acid and amide was developed via distillation-precipitation copolymerization of N, N'-methylene diacrylamide (MBA), vinylphosphonic acid (VPA) with acrylamide (AM) employing Fe3O4 decorated by SiO2 (Fe3O4@SiO2) as magnetic core. Due to the synergistic effect of phosphonic acid and amide ligand, the sorbent could capture thorium from concentrated HNO3 media efficiently, and the maximum adsorption capacity (qmax) at 4 mol L−1 of HNO3 solution reached up to 232.5 mg g−1, superior to that of all magnetic sorbents reported previously. Furthermore, the sorbent displayed good selectivity towards thorium in the presence of competitive metal ions including La3+, Nd3+, and Ce3+. The excellent thorium sorption behavior in strong hydrogen nitrate solution was merely ascribed to the complexation of thorium with phosphonic acid ligand, and the amide ligand could not complex with thorium, evidenced by XPS, FT-IR and DFT method. However, the presence of amide ligand could enhance the hydrophilicity of the sorbent and the free movement degree of phosphonic acid ligand to a certain extent, both of which could help to promote the thorium sorption on the sorbent in strong HNO3 media. Besides, due to its core–shell structure and superparamagnetism, the sorbent not only exhibited excellent acidic resistance in strong acid medias, but could be magnetically recouped, which could avoid tedious centrifugation or filtration of traditional adsorbents. This work provides a novel strategy to develop magnetic sorbent for the preeminent entrapment of thorium from strong acid solutions.

Effects of Nanowire Doping on Plasmon-Enhanced N2 Dissociation.

Doping a transition metal element into plasmonic systems can tune the optical properties of the system, which will potentially facilitate the plasmon-enhanced catalytic process. In this study, we applied the linear-response time-dependent density functional theory (LR-TDDFT) method with real-time electron dynamics and mean-field Ehrenfest dynamics methods to computationally investigate the effects of doping silver nanowires on plasmon-enhanced N2 dissociation. We calculated the absorption spectra for different doped systems, applied an external electric field to the system, and performed mean-field Ehrenfest dynamics to examine how plasmonic excitation will affect the N2 activation or dissociation. In addition, we also studied how the transition metal dopant affects the system's electronic structure and potential energy surface.

BC cone-shaped anodes for lithium-ion batteries

The efficiency of lithium-ion batteries (LIBs) depends upon anode materials possessing high capacity. In present study, we investigate boron carbide cone anode (BCC) for LIBs. The first-principles density functional theory (DFT) method is used to design anode materials based on BCC for application in LIBs. We found that the BCC shows negative Li adsorption energies. Our results also revealed the fast diffusions of Li ion on the BCC with the small energy barrier of 0.34 eV. The storage capacity of BCC system rank among the highest capacity of anodes for LIBs, with value of 785 mAh/g. The low average open-circuit voltage (OCV) value of BCC system indicates that this anode can handle a large operating voltage in LIBs.

DFT and TD-DFT Studies of D-π-A Organic Dye Molecules with Different Spacers for highly Efficient Reliable Dye Sensitized Solar Cells.

This study focuses on six D-π-A systems, utilizing diverse π-spacers as bridges. Comprehensive analysis through Density Functional Theory (DFT) and Time-dependent Functional Theory (TD-DFT) methods at B3LYP using 6-31G (d.p) basis set explores geometrical, electrical, optical, photovoltaic, and absorption properties. EHOMO, ELUMO, and energy gap (Egap), for all of these dyes have been determined and discussed using ground state optimization. TD-DFT calculates optical properties, unveiling enhanced excitation energies and HOMO-LUMO energy levels, indicative of improved electron injection and dye regeneration processes. Examination of energy gap, open-circuit voltage (VOC), free energy change (ΔGinject), light harvesting efficiency (LHE), and absorption spectra reveals D4 dye's lower Egap and robust absorption in the visible spectrum. Molecular tailoring emerges as a promising technique for optimizing D-π-A sensitizer design, offering potential advancements in DSSCs applications.

Axial coordinated manganeseporphyrin/tetraazaporphyrin-4-(10-phenylanthracen-9-yl)pyridine dyads: self-assembly, structure and spectral properties in ground and excited states.

Self-assembly of new donor-acceptor systems based on (5,10,15,20-tetraphenylporphinato)manganese(III)/(5,10,15,20-tetra-4-tert-butylphenylporphinato)manganese(III)/(octakis(4-tert-butylphenyl)tetraazaporphinato)manganese(III) acetate ((AcO)MnTPP/(AcO)MnTBPP/(AcO)MnTAP) and 4-(10-phenylanthracen-9-yl)pyridine (PyAn) was studied using fluorescence spectroscopy and mass spectrometry. It was found that the coordination complexes of 1:1 composition (dyads) are formed in toluene. The spectral properties, the chemical structures and redox behavior of the dyads were described using 1H NMR, IR, EPR spectroscopy and cyclic voltammetry, respectively. The dynamic processes and the characteristics in the excited state of the dyads were obtained using the femtosecond transient absorption spectroscopy method. Density functional theory (DFT), time-dependent DFT methods were used to elucidate the dyad electronic structures and to establish the differences in their frontier molecular orbitals. The analysis of the lambda parameter and the distance of hole-pair interaction was indicated more favorable charge transfer between the macrocycle and the axial PyAn fragment in (AcO)(PyAn)MnTAP. The calculated values of the zero-field splitting parameters D and E/D, together with the g tensors of the lowest spin-orbit state for (AcO)MnTPP and (AcO)(PyAn)MnTPP were obtained using the combination of DFT and Multireference Perturbation Theory (CASSCF/NEVPT2) simulations. The data obtained develop the fundamental basis in the field of photovoltaics and show the prospects for the study of molecular systems of this class.

Study of new p-tolylpiperidin-4-one as an anti-Parkinson agent: Synthesis, spectral, XRD-crystal, in silico study, electronic and intermolecular interaction investigations by the DFT method

This study thoroughly investigated the potential of using 3,3-dimethyl-2,6-di-p-tolylpiperidin-4-one, (DMeTP) as an anti-Parkinson medicine against Parkinson's disease. To accomplish this, DMeTP was synthesized and characterized by various spectral techniques such as FT-IR, NMR, and Mass. The Hirshfeld analysis and finger plot were used in this study to reveal important insights about the intermolecular relations of the compounds. The theoretical analyses of the compound was carried out using Density Functional Theory (DFT) at the level of theory B3LYP/6-311++G(**). The frontier orbital and the molecular electrostatic potential studies proved the chemical stability of the DMeTP structure. Then, weak interactions like hydrogen and Vdw interactions were investigated throughout the topological study (AIM, RDG). The alpha-synuclein protein was used in a molecular docking analysis to uncover inhibitory properties against Parkinson's disease. Additionally, the pharmacokinetic and physicochemical characteristics of the DMeTP molecule were examined using the SwissADME online program.